For the creation of my amplifier, I deigned and modelled using Autodesk 3DS Max.
Initially, I modelled the amplifier from 3 box meshes, with as many polygons as I thought necessary after a bit of trial and error. I began by cutting angles into the polygons, then deleting and rotating faces.
After the overall shape had been constructed, I selected and extruded some of the edges to give more detail to the model, as shown in the images below. I also tested various materials to be applied to the amplifier. I tried a cellular diffuse map - which gave a reasonable look, but not as realistic I was hoping for.
After modelling and changing the various amplifiers I focused on the dials and buttons attached to the head of the amplifier. The final image shows the completed full stack amplifier with texture.
To add more detail to the model, I decided to chamfer all of the visible edges so that it doesn't look as sharp, and the lighting will look more professional for the final renders. I also modelled dials for the front of the amplifier head.
Texturing the Amplifier
I created a multi-sub object material, which allowed me to update my models with the correct materials that had been assigned using material ID from the edit-poly menu. The textures below are photographs which I have taken of my own amplifier to get a realistic looking model:
By assigning material ID's to groups of polygons, this saves a lot of time. Rather than selecting each polygon individually each time - the material ID can be selected as shown in the image:
Capturing the Video Footage
When capturing my video footage, I wanted to ensure I had good weather conditions, as this would greatly benefit the overall look of my project. By having the raw video footage as clear and close to the original pitch as possible, it will make alterations to the effects and layout much easier, and hopefully provide a good, realistic looking scene. I looked on the BBC website for weather conditions (news.bbc.co.uk/weather/), and the Golden Hour Calculator (http://www.golden-hour.com/).
These 3 videos below are the 3 final scenes I have chosen for my final project:
Scene 1
Scene 2
Scene 3
These shots were chosen from multiple which I took in the Peak District. I felt that these 3 were the best quality, and angles for the visuals I was hoping for. The camera panning is rather smooth due to using a tripod which means that the shots can be tracked much easier using SynthEyes.
Tracking the Motion using SynthEyes
The video shots are then imported into SynthEyes, where the motion is tracked. The markers on the image show each point which was tracked by the computer. Some trackers are not as good as others, due to unwanted objects such as birds and sunlight.
These images show objects which have been added into the scene:
Setting up the 3D Scene
Once the video footage has been tracked, you are left with numerous markers on screen. By scrubbing across the timeline, you can see that these points remain locked to certain areas of the footage. This will be very helpful when attempting to layout the amplifiers in the final scene.
The Scene within 3DS Max
The first thing within 3DS Max is to import the MaxScript which was exported from SynthEyes. This script applies the same information tracked from the original video file, to a camera within the 3D scene. This camera will share the same motion as was filmed by hand.
With the MaxScript imported, I can replace the basic objects created in SynthEyes with the completed .obj of the amplifier. Due to the previous objects position, I know that my amplifiers will be near enough exactly where I want them to be.
You can see from the images below that depending on the shape and size of the basic objects, the size of the amplifiers will be relative to this. The wider a shape is, the more amps side by side should go in:
Lighting: For the lighting within my scene, I used an omni light to mimic the sunlight shown in the original raw video footage. I tried to match the shaded areas of the video with similar shading from my lighting and renders.
Z-Depth: In order to add depth to my scene, I have told the camera within the scene to show certain distances in certain focus to enable a more realistic looking environment.
The image below shows a sample render from the z-depth pass:
Diffuse:
Creating the Explosion using Particle Systems
I created the amplifier explosion for my second shot, by using PArray.
The images below show the different explosion types I tried. I feel that the chunky option is most like what would happen in an actual explosion. The many small triangles looks more like a glass smashing type explosion.
Compositing the Footage and Renders
The images below show an example render from the second shot showing the amplifier explosion, the render setup showing the various elements required for rendering, and how those passes have been appropriately saved in case of any errors. By saving each element of each frame as a separate Targa image, this reduces the amount of content lost if an error occurs. These images can also be imported as a sequence, shown as one continuous video playback.
The image below shows an example rendered frame once the 3D renders have been composited over the original video footage. This render is showing the PArray with triangular explosive pieces:
After compositing my 3 shots together, I have decided to change the order in which they go. Due to the camera panning from left to right in 2 shots, and from right to left in 1, I have ordered the shots moving from left to right, right to left, left to right. I feel that this movement looks more natural, and gives more of an impression of one scene shot from multiple angles.
Sky Replacement
I felt that the sky replacement was necessary as the sky in the video shots is very plain and boring. I have therefore taken photographs of the sky from 3 different angles on a cloudy day. With these images, I have performed a linear wipe of around 70% transition. This gives a realistic looking sky to the composition, without covering too much of the original video content.
The motion is tracked within After Effects, and the same motion is applied to the sky images.
Applying Video Filters and Adjustment Layers
Using curves has helped to adjust the colouring of the scenes. By adjusting the RGB values, the full composition looks more like it has all come from the same shot.
Levels, Tint and Radial Blur: Scene 3
Renders
These are the renders for my scenes showing how they have progressed with updated amplifier models and sky replacements:
Scene 1: Render 1
Scene 1: Render 2
Scene 2: Render 1
Scene 3: Render 1
Full Comp: Render 1
Full Comp: Render 2
Full Comp: Render 5
Sequence Breakdown
To create the sequence breakdown, I have shown each of the various layers used to build up the final sequence. I have displayed each pass which is used within the sequence, the original video footage, a sky replacement and final adjustments to correct the merged composition.
Making Changes to the Final Sequence
In order to improve the overall aesthetics and quality of my sequence, I have included Ambient Occlusion and Shadow passes to add more depth to the scenes. By adding contact shadows and cast shadows, the composited renders appear to fit better with the scene, rather than looking like they have just been placed on top.
In order to achieve these shadows, I had to recreate the geometry of the landscape within my shots. I created these from a plane - and used soft selection to adjust the polygons until I had something which looked similar to the video footage. A matte/shadow material is then applied to the plane to generate the shadows.
In order for the shadows to be rendered out, the surfaces to cast and receive shadows boxes should be checked like in the images below.
Below is an example render of how the shadows appear on the landscape geometry, and a top viewport screenshot showing the shadows from above:
I have also resized the amplifiers in the distant areas of my scenes. This gives a much more realistic impression of depth.
The images below show the new layout for the scene, showing lights and planes, and the camera view looking at the resized amplifiers:
Due to resizing the amplifiers, creating new geometry and adding new lighting into the scenes, each pass is to be rendered out again with the new details.
There are directional lights and skylights within the scenes. The directional light is to mimic the sun and helps to cast shadows. The skylight helps give a merging effect between the objects and the geometry.

For the Ambient Occlusion pass, I used a skylight to create nice contact shadows. I used the light tracer for rendering which gave me the results shown below.
I also decided to change the explosion of the amplifier as it did not look as realistic as I was hoping for. Instead of using P-Array, I used the Particle Flow Systems to generate a quick sequence of square pieces, of varying sizes - to come from the inside of the amplifier. I have changed the direction of the explosion so that pieces do not fly from all sides of the object, and also the speed of the motion.
I also used the bend modifier within 3DS Max to have patches of the amplifier front fall away, and flap due to acting forces. This used keyframe animation and I feel it looks more professional than the previous explosion. The orange explosion effect has been removed also to add to the realism.
I have also decided that the Radial Blur I applied to the adjustment layers of my previous renders does not look professional, and appears to distort from the main focus of the scenes.
By using masks, I have added grass layers in front of some of the amplifiers to help merge the scene. The masks are displacing a frozen image taken from the video footage, which is then tracked to the same motion as the camera movement.
I have adjusted the mask feather and opacity to blend with the composition better.
Once the tracked motion has been applied to the masks, I fine-tuned some of the key frames so that the mask is not as jumpy.
Final Sequence
Sequence Breakdown









































































No comments:
Post a Comment